RECOM 3 SET EPP EC Enthalpy Heat Recovery Unit

Why choose RECOM 3 EPP EC?

Discover a new level of home comfort with the RECOM 3 EPP EC air handling unit. This device is designed to meet the highest demands of modern homes - from energy savings to ultra-quiet operation. The main distinctive feature of this model is its lightweight, thermally insulating EPP (expanded polypropylene) casing. Weighing only 15 kg, ceiling installation becomes much simpler and faster, and the casing design prevents thermal bridges.

Two heat exchangers - customized for your needs

Depending on your home's microclimate needs, you can choose an enthalpy (SET) or a standard plate (ST) heat exchanger. The enthalpy variant is highly popular because it recovers moisture back into the rooms, preventing them from drying out in winter, and it does not require a condensate drain. Meanwhile, the standard plate model stands out with even higher heat recovery efficiency (up to 91%), though it requires a drainage line.

Smart control and reliability

RECOM 3 EPP EC offers flexible control options. By choosing the model with FPD automation, you will receive a modern touch screen and an integrated Wi-Fi module, allowing you to control the system conveniently from your smartphone. With the help of ORO Haus specialists, you can easily configure the entire ventilation system, ensuring long-lasting and flawless operation.

Key RECOM 3 EPP EC specifications

Familiarize yourself with the technical parameters of the RECOM 3 EPP EC. These indicators ensure efficient home ventilation with minimal energy consumption.

Dimensions and weight

Thanks to its compact dimensions and lightweight EPP casing, the unit is easy to install in tight ceiling spaces.

Features and capabilities

The unit integrates modern features that ensure automated and smooth operation throughout the year.

This installation guide will help you understand the main steps for installing the RECOM 3 EPP EC AHU on the ceiling. We recommend entrusting the work to qualified specialists, and you can always download the full manufacturer manual from the specifications tab.

What is in the box

Standard unit package:

• Fully assembled AHU with EPP casing and integrated automation
• Standard filter set
• User and installation manual
• Selected control panel (FPD or FP)

What you will need additionally

Components required for installation that are not included:

• Threaded rods and nuts for suspension
• Vibration isolation pads (recommended)
• Ductwork system elements and flexible connectors
• Condensate siphon and tubing (for ST model only)

Dimensions and location selection

The unit is mounted horizontally to the ceiling. Ensure there is enough space below to open the service doors and replace the filters. Since the casing weighs only 15 kg, installation is significantly easier than with metal alternatives.

Duct connection

Standard 160 mm ducts are used. When connecting ducts to the AHU, it is recommended to use flexible connectors to dampen vibrations and prevent noise transmission. Observe the airflow directions indicated on the unit's casing.

Condensate drainage

If you chose the enthalpy (SET) model, a condensate drain is not required. If you are using the plate (ST) model, a U-trap siphon with a non-return valve must be installed to prevent sewer odors from entering the ventilation system.

Electrical connection

The device connects to a standard 230V network. The maximum power is 151 W (without an electric heater). All electrical connections must be performed by a qualified electrician in accordance with safety regulations.

Control systems

If the FPD model is selected, the control panel supports Wi-Fi, making it easy to connect to the home network and control the system via a smartphone app. Sensors (if used) are connected to the designated automation terminals.

First start

Before turning on the system for the first time:

• Check that the filters are installed correctly
• Ensure that the ducts are sealed and installed according to the diagram
• Power on the unit and balance the airflows using the control panel

Maintenance and filters

Regularly check filter contamination. It is recommended to replace them every 3-6 months, depending on the ambient air quality. The heat exchanger should be cleaned once a year according to the manufacturer's instructions.