What accessories are mandatory when installing a heat pump?

For a safe system startup, it is mandatory to have a hydraulic safety group, an expansion vessel, a dirt separator (magnetic filter), and a properly sized three-way valve if you are preparing domestic hot water. Without these essential components, the system will not operate stably, and the compressor will not be protected against hydraulic shocks or debris accumulated in the system. Most manufacturers will void the unit's warranty if mandatory safety elements were not used during installation.

Can I use universal sensors instead of original manufacturer ones?

It is strictly recommended to use only original or manufacturer-certified temperature sensors. The heat pump's automation is calibrated to read specific resistance values. If an incorrect universal sensor is connected, the system will receive false data about water or outdoor temperatures, causing the pump to run inefficiently, consume too much electricity, or constantly display system errors.

What is a magnetic filter and why is it needed?

A magnetic filter (dirt separator) collects metal shavings, rust, and other debris circulating in the system, preventing them from entering the sensitive heat pump heat exchanger. This is an especially crucial accessory when renovating old homes where a heat pump is connected to an old radiator system. Without this filter, the sludge from the old pipes will quickly clog the modern pump's components and irreparably damage the unit.

Heat Pump Accessories

Free consultationOfficial warranty

Official representativeFast delivery

Professional installation

No products here yet. If you are looking for a specific model, contact us.

Ensure the flawless and long-lasting operation of your heating system by using original components. Heat pump accessories – from smart controllers to safety valves – are essential for the safe functioning of your unit.

Discover everything you need for smooth installation and system expansion in one place.

Cheap compromises and expensive consequences

After investing thousands of euros in a modern heat pump, trying to save a few dozen euros on minor installation parts is the biggest mistake homeowners make. By using valves of unknown origin, omitting mandatory filters, or selecting incorrectly sized expansion vessels, the entire heating system is doomed to constant failures. Water starts dripping in the utility room, pressure drops, and the pump itself operates inefficiently, wasting your electricity.

The most painful part occurs when the unit breaks down and the manufacturer refuses to honor the warranty. Authorized service centers first check whether the system was installed according to hydraulic requirements. If the mandatory magnetic filter is missing, and the compressor fails due to debris entering it, the expensive repair will fall entirely on your shoulders.

Invisible heroes guarding your peace of mind

Professional heat pump accessories act as an invisible shield, protecting your main investment 24 hours a day. A high-quality safety group instantly reacts to dangerous pressure spikes, and original temperature sensors send precisely accurate data to the mainboard. This allows the compressor to operate in the most optimal mode, guaranteeing even warmth throughout your home.

A properly equipped boiler room requires no attention from you for decades. By using reliable three-way valves and original communication cables, switching between home heating and domestic hot water preparation happens smoothly and silently. You simply enjoy flawless comfort, knowing that your system is built without any weak links.

Protects the warranty and extends lifespan – original accessories and mandatory filters are an absolute prerequisite for the manufacturer's 5 or 7-year warranty to remain valid without any exceptions.

Every heating system is unique, so the need for accessories directly depends on your home's infrastructure and the chosen heat pump model. When outfitting your utility room, you must pay attention to these critical components:

Magnetic filter (Dirt separator) - this is an absolutely mandatory element. It collects metal shavings and rust from radiators or piping. Choose filters with powerful neodymium magnets and a convenient drain valve so annual maintenance takes just a few minutes.
Three-way valve - if your air-to-water heat pump does not have an integrated water heater, this valve will be needed for flow distribution. It automatically diverts the warm water flow from underfloor heating to the domestic boiler. It is essential to select a valve based on your piping's flow capacity (Kvs value).
Safety group and expansion vessels - these elements protect the system from excessive pressure when water expands as it heats. The expansion vessel's volume must be calculated individually, depending on the total water volume in your home's radiators or underfloor heating pipes.
Temperature sensors (Probes) - when planning hybrid systems or connecting additional buffer tanks, extra sensors will be required. Always choose sensors specifically tailored to the pump manufacturer (e.g., Panasonic, Daikin, etc.).

Aesthetics and smart control

Accessories are not just for protection, but also for your daily convenience. If you want to control your heating via phone from anywhere in the world, you will need an additional Wi-Fi module (if it is not factory-integrated). It is also highly worth investing in aesthetic cable trunking and quality mounting materials so your technical room looks tidy and professional.

Critical installation rules

While placing the pump itself seems like the main job, true craftsmanship is revealed in correctly connecting all the accessories in the boiler room. Every single valve and filter has its strict installation location and flow direction.

Filter position - the magnetic filter must be installed on the return line (just before the heat pump). This way, it catches all the debris coming from the house before it can enter the unit's sensitive heat exchanger.
Safety valve drainage - all safety relief valves must be connected to the sewage system using special tundishes. If a pressure spike occurs in the system, the discharged water will drain safely without flooding your room.
Sensor insulation - temperature sensors strapped to pipes must be coated with thermal paste and blindly insulated with thermal foam. Otherwise, they will measure the utility room air temperature instead of the water, confusing the pump's automation.
Proper cable cross-sections - for three-way valve actuators and additional circulation pumps, cables of the manufacturer's specified cross-section must be used, avoiding any exposed splices in damp zones.

Maintenance you can easily do yourself

Maintaining correctly installed accessories requires no special tools or engineering knowledge. The most important task before every heating season is to clean the magnetic filter. In most modern filters, it is enough to pull out the magnetic core and open the drain valve so the accumulated sludge flushes out with a small amount of water. It is also worth visually checking the pressure gauge – if the system pressure constantly drops, it may signal wear in the expansion vessel membrane, which can easily be replaced by your heating technician.

Heat Pump Accessories

Cheap compromises and expensive consequences

Invisible heroes guarding your peace of mind

Aesthetics and smart control

Critical installation rules

Maintenance you can easily do yourself

Frequently Asked Questions

About

Help

Services

Resources

Why original accessories are the guarantee of your heating system's longevity?

How to choose the essential accessories for your heat pump?

Accessory installation and utility room maintenance

Frequently Asked Questions

About

Help

Services

Resources